All the downloads you will need for NABERS UK as well as previous versions of documents.

 

The documents below are everything you will need for NABERS UK  including Energy for Offices and Design for Performance.

NABERS UK General Downloads

NABERS UK Operations Manual

This document is intended for the use of licensed Energy for Offices Assessors and those completing the training to become a licensed Energy for Offices Assessor. This document contains all the information necessary for licensed Assessors to perform licensed NABERS UK Energy for Offices performance ratings and should be seen as a guide to the elements of the scheme rather than a strict manual that must be followed to the letter. It defines roles and responsibilities of relevant parties. Responsibilities will also evolve over time.

 

Download 

NABERS UK Code of Conduct

This Code of Practice has been developed to assist the Licensed Assessor gain a clear understanding of their responsibilities and obligations. The intention of this Code is to
ensure that all Licensed Assessors operating under NABERS UK do so in a manner that is consistent with the standards and procedures that form a part of the NABERS UK scheme.

It is a condition of licensing under the NABERS UK Assessor agreement that Assessors
must comply with the Code of Practice. BRE may amend the Code of Practice from time to time by notice in writing to the Licensed Assessor.

 

Download 

Assessor Brand Guidelines

As a valued licensee of the NABERS community, this guide is designed to help you understand the NABERS brand and make the most of it.

By consistently following these guidelines, we can build a strong, recognisable brand and maximise the value in everything we do. A brand will constantly evolve and develop so always check that you are referencing the most recent tools

 

Download 

Validation Record Template

The Validation Record Template must be used to verify that each electrical non-utility metering systems has been installed properly, is functioning correctly and is being interpreted correctly. The CT ratio and meter multiplier programmed in the non-utility metering system must also be recorded in the NABERS UK validation record. All readings and any adjustments must be documented using the meter validation template (see Appendix A of the Metering and Consumption Rules for examples)

 

Download 

NABERS UK scheme administrator transition FAQ's

Frequently asked questions regarding BRE’s decision to end its licence agreement for the energy performance rating tool, NABERS UK, in order to focus on its world-leading BREEAM scheme.

 

Download 

NABERS UK Design for Performance Downloads


NABERS UK Guide to Design for Performance v2.0 (Base building, Whole building and Tenancy)

Design for Performance (DfP) provides a framework by which projects can commit, preconstruction, to achieve a NABERS Energy for Offices rating in post-construction performance. This
guide sets out the minimum steps and processes required for a project implementing the DfP process.

This guide is an updated version of the NABERS UK Guide to Design for Performance version 1.1.

 

 

 

Any DfP projects wishing to follow the previous versions of the Rules:

  • NABERS UK The Rules – Energy for Offices v1.2 (base building only)
  • NABERS UK The Rules – Metering and Consumption v1.1 (base building only)
  • NABERS UK – Guide to Design for Performance v1.1 (base building only)

should submit their completed Design for Performance Agreement to BRE by 31st July 2023. After this date the current (v2) Rules will be applicable.

 

Download 

NABERS UK Guide to Design for Performance v1.1 (previous version - Base building only)

Design for Performance (DfP) provides a framework by which projects can commit, preconstruction, to achieve a NABERS Energy for Offices rating in post-construction performance. This guide sets out the minimum steps and processes required for a project implementing the DfP process

This Guide is intended to provide assistance for all parties involved in the Design for Performance process, and in particular the Applicant and associated project team, the Independent Design Reviewer and the person(s) conducting the building performance simulation, referred to in this document as the Simulator.

 

 

Any DfP projects wishing to follow the previous versions of the Rules:

  • NABERS UK The Rules – Energy for Offices v1.2 (base building only)
  • NABERS UK The Rules – Metering and Consumption v1.1 (base building only)
  • NABERS UK – Guide to Design for Performance v1.1 (base building only)

should submit their completed Design for Performance Agreement to BRE by 31st July 2023. After this date the current (v2) Rules will be applicable.

 

Download 

NABERS UK Design for Performance Agreement

Design for Performance Agreements are available for new or refurbished buildings for the following Rating Tools: Energy for Offices.

This Agreement qualifies as a Design for Performance Agreement. It establishes the process that the Applicant is required to follow to obtain a Design Reviewed Target Rating. This Agreement also sets out the basis on which the Applicant may promote its Target Rating and Design Reviewed Target Rating and use the Trade Marks.

 

Download 

NABERS UK Design for Performance Brand Guidelines

 NABERS Design For Performance Brand Guidelines details the guidelines surrounding logos and certificates.

 

Download 

NABERS UK Design for Performance Fact Sheet

The UK has a design-for-compliance culture which has led to the well-known ‘performance gap’ that exists between original design intent and how a building truly performs in-use. Design for Performance is a process that overcomes this, where a developer or owner commits to design, build and commission a building to achieve a targeted NABERS Energy rating.

If you are a developer or owner, you can register any new office development or major refurbishment by signing a Design for Performance Agreement. Your target NABERS Energy rating must be 4.0 stars or above.

 

Download 

Example Simulation Report

This report is an example simulation report that demonstrates the key features of a simulation report compliant with the requirements of a Design for Performance Agreement. A Simulation Report should provide a realistic estimate of the operational energy performance of the project. As a part of the Independent Design Review process, it is a requirement to provide a Simulation Report to the selected Independent Design Reviewer for evaluation.  More information on the sections that a simulation report should contain, and its format can be found in the Guide to Design for Performance

 

Download 

NABERS UK Energy for Offices Downloads

 

To download the updated versions of The Rules for Energy for Offices v2.0 (Base building, Whole building and Tenancy) and Metering and Consumption v2.0 (Base building, Whole Building and Tenancy), please fill out the form below.


NABERS UK The Rules - Energy for Offices v1.2 (previous version - Base Building only)

NABERS UK currently offers one type of rating, NABERS Energy for Offices, which measures and rates the Base Building energy efficiency of an office. An accredited NABERS Energy for Offices rating is awarded when the Scheme Administrator certifies a rating completed by an Assessor.

The purpose of this document is to give clear requirements for Assessors when they are evaluating offices for their energy usage with the goal of providing a NABERS rating. It is intended that this document, be read and used alongside NABERS UK The Rules – Metering and Consumption.

 

 

 

Any ratings performed using the previous versions of the Rules:

  • NABERS UK The Rules – Energy for Offices v1.2 (base building only)
  • NABERS UK The Rules – Metering and Consumption v1.1 (base building only)

 

must apply for certification by 31st July 2023.  Any Ratings using these Rules documents that are submitted after this date will be rejected.

 

Download 

NABERS UK The Rules - Metering and Consumption v1.1 (previous version - Base Building only)

This document presents the metering and consumption Rules that are common for NABERS Energy for Offices ratings. It is intended that this document be read alongside  NABERS UK The Rules – Energy for Offices.

Its purpose is to provide the standard for the collection and assessment of metering and consumption data for energy. As such, it presents the minimum requirements of what Assessors must adhere to when they are conducting a NABERS rating.

 

 

 

Any ratings performed using the previous versions of the Rules:

  • NABERS UK The Rules – Energy for Offices v1.2 (base building only)
  • NABERS UK The Rules – Metering and Consumption v1.1 (base building only)

 

must apply for certification by 31st July 2023.  Any Ratings using these Rules documents that are submitted after this date will be rejected.

Download 

Interim Ruling for Thermal Energy Systems v1.0 August 2021

This document provides rules for NABERS Assessors when undertaking assessments for ratings with shared thermal energy systems. It supersedes the 2008 NABERS document Validation Protocol for Thermal Energy Exclusions v2.0.

 

Download 

UK Ruling for Combined Heat and Power & District Heating and Cooling v1.0 June 2022

This document is a Ruling that provides additional instructions for Assessors that are required to use the following documents as part of accounting for district heating and cooling in a NABERS UK Energy Rating:

• Ruling: Treatment of Cogeneration and Trigeneration Systems v1.2 May 2022
• Standard Methodology in The Interim Rules – Thermal Energy Systems v1 2021.

 

Download 

NABERS UK Reverse and Simple Calculators

The reverse calculator for Energy for Offices helps you calculate the maximum amount of energy an office building can use to achieve a star rating that you specify.

The simple rating calculator for Energy for Offices helps you calculate the star rating of an office building for an amount of energy that you specify.

 

Download 

Shared Services and Facilities

This document is a Ruling for the treatment of shared services and shared facilities in precincts and mixed-use buildings. It provides guidance for Assessors where such
circumstances are present.

This Ruling will supersede the following documents:
a) NABERS Shared Facilities (20 May 2014)
b) NABERS Shared Services for Mixed-use Buildings (December 2015)

 

Download 

On-site Renewable Electricity Generation Systems

This document is a Ruling for the treatment of On-site Renewable Electricity Generation (OREG) systems and their subsequent renewable electricity. It provides guidance for Assessors where such systems are present.

 

Download 

Treatment of Cogeneration and Trigeneration Systems

This document is a Ruling for the treatment of either a cogeneration system or a
trigeneration system (“a system”). It provides guidance for Assessors where such systems are present either onsite or offsite relative to the rated premise and the metering and measurements of all scenarios.

The methodology presented in this document outlines how to use the calculator to determine the energy inputs to be entered in the NABERS rating input form, based on the apportioning of energy and the allocation of greenhouse gas emissions as determined by the calculator.

This Ruling will supersede the Interim Methodology for the treatment of Cogeneration and Trigeneration Systems in NABERS ratings (version 1.1).

 

Download 

Code of measuring practice

The purpose of the Code is to provide succinct, precise definitions to permit the accurate measurement of buildings and land, the calculation of the sizes (areas and volumes) and the description or specification of land and buildings on a common and consistent basis. This may be required for valuation, management, conveyancing, planning, taxation, sale, letting, or acquisition purposes.

 

Download 

Resource Updates: